TANIM
ThermoCoat-Seal (TSL-30) is a special surface protecting emulsion material, based on water and siloxane. It is highly resistant to alkalis. KULLANIM YERLERİ
It is used not only on sloped open air terraces and concrete roofs with Thermocoat Roof (TCÇ-510) material specifically, but also used on all mineral construction materials with porous characteristics and on high alkalic grounds such as brick, concrete, mineral coating and limestone. AVANTAJLARI
• High resistance against ultraviolet rays
• Deep penetration
• High resistance against alkaline
• No affect on vapor permeability of surfaces in a negative way
• Environment friendly because of its water based structure
• Not dissolving, after the cure through completing its chemical reaction.
• Highly durable against outer factors and frost
DEPOLAMA TAŞIMA
• The bags should not be opened, torn or pierced before the usage.
• Bags must be protected against outer factors and frost.
SAĞLIK EMNİYET
• TSL-030 is a water based material, which is not flammable, toxic or harmful.
• Please avoid contact of the material with eyes. In case of contact, rinse the eyes properly with the water.
• Do not use empty packages for the storage of either food and/or drinking water. Do not swallow..
KARIŞIM YÖNTEMİ
Thermoseal (TSL-030) is ready for the usage. Before using the product, it is mixed with a low-speed motor or manually in order to provide a homogeneous mixture.YÜZEY HAZIRLAMA
The surface is completely made free from any strata such as dust, oil and stain, paint, dirt, cement slurry, form oil, dusting, which decrease the capability of adherence.UYGULAMA
TSL-030 is applied by using a brush as one layer or two layers according to the porosity of the surface.DİKKAT EDİLECEK HUSUSLAR
• Application on TCÇ-510 must be done after 3 days of TCÇ- 510’s application. (20°C±3ºC)
• Applied surfaces should be protected against rain, water and frost until the surface completely dries.
• For the application of TSL-030, the surface temperatures should be between +5°C and +30°C.
• High temperatures shorten drying periods whereas low temperatures increase.
• It should not be applied on the surfaces, which are frozen or about to melt. Furthermore, if there is a probability of frost in 48 hours, also should not be applied.
• TBR-980, which is applied at +23°C, gains the test dry and mechanical strength in 28 days.